Product range
Conference, Headset and Wiring Accessories
Six products for the rooms and the desks around a phone system: an all-in-one conference terminal, a wireless conference kit, a USB camera, open-ear Bluetooth earbuds, an ATA gateway for analog phones and a 2-wire converter for retrofit cabling.
- Room audio and video: the CA600 terminal with dual 11-inch screens, and the CA400 kit with camera, hub and speakerphone
- A 12-microphone 360° array and dual 10W speakers on the CA600
- 4K wireless screen sharing on the CA400, plug and play with one click
- The CM60 USB camera at 1080p, documented with the X7A desk phone
- Bluetooth 5.4 open-ear earbuds with a charging case carrying a visible battery display
- An ATA gateway that puts an analog phone on the IP system with two SIP lines and one FXS port
- A 2-wire converter for retrofit work, where network and power travel over an existing two-core cable
The room, the desk and the cable
This range collects the equipment that sits around a phone system rather than on the dial plan: the terminals that run a meeting, the camera that adds video to a desk phone, the headset the user wears, and the gateways that bring analog or existing cabling into the system.
- Meeting room — CA600 all-in-one terminal, or the CA400 kit (RC10 receiver hub, CM70 camera, MS10 speakerphone)
- Desk video — CM60 portable USB HD camera at 1080p, documented with the X7A phone
- Personal audio — DH401B open-ear Bluetooth earbuds with a charging case
- Cabling and analog lines — PN1 2-wire converter and GA10 ATA gateway
How each device connects
Two of the six devices are call terminals in their own right; the others attach to a phone, a computer or a pair of wires. The distinction matters when you are planning a room.
- CA600 and CA400 are room systems: casting, cameras and speakerphones brought up together
- CM60 is a USB accessory — the phone or computer it is plugged into carries the call
- DH401B is a Bluetooth accessory with multipoint for the phone and the PC
- GA10 is the analog-to-IP gateway, with 1 FXS port and 2 SIP lines
- PN1 is a cabling device, carrying network and power over a two-core cable
SIP line counts are not stated for the CA600, CA400, CM60 or DH401B, and the PN1 is not a SIP endpoint; the GA10 states two SIP lines.
What the materials do not state
- Dimensions, weight and colour: not stated for any product on this page
- SIP lines: not stated for the CA600, CA400, CM60 and DH401B
- PoE: stated for the CA600, not stated for the CA400 and GA10
- Expansion units for the CA400: named in the source as CP20 with no specification
- Other speakerphones and headsets in the wider range: documented, but without a usable product photograph, so they are quoted on request rather than listed here
Where a fact is missing we say so rather than guess; ask us and we will confirm against the current documentation before you specify.
Conference, Headset and Wiring Accessories in this range
CA600
A meeting-room terminal with dual screens, 4K casting and an all-in-one audio array.
- Dual 11-inch touch screens
- 12-microphone 360° array
- Dual 10W speakers
CA400
A three-piece wireless kit for rooms where the meeting runs from a laptop.
- 3-piece kit
- 4K wireless casting
- 8-array microphones
CM60
A 1080p USB camera that turns a desk phone into a video terminal.
- 1080p video
- USB connection
- Adjustable privacy cover
DH401B
Open-ear earbuds that switch between the desk phone and the PC.
- Weighs 13.6 g
- Bluetooth 5.4 multipoint
- Dual-mic AI noise reduction
PN1
Carries network and power over existing two-core cable, for retrofit work.
- Network + power over 2-wire
- Up to 1600 m network run
- AC 100–240 V supply
GA10
Two SIP lines and one FXS port, so an analog phone joins the IP system.
- 2 SIP lines
- 1 FXS (RJ11) port
- Micro USB DC 5V/1A
Choosing between options
Conference and accessory range — what each device does
| Model | Type | Connection | Power | Where it fits |
|---|---|---|---|---|
| CA600 | All-in-one conference terminal | Wired network; wireless casting | PoE or wired | Medium to large meeting rooms |
| CA400 | Wireless conference kit | USB Type-C, or HDMI plus USB | Not stated | Rooms running a meeting from a laptop |
| CM60 | Portable USB HD camera | USB | From the USB host | Video calls at a desk phone (X7A) |
| DH401B | Open-ear Bluetooth earbuds | Bluetooth 5.4 multipoint | Charging case | Personal audio at a phone and a PC |
| PN1 | 2-wire converter | Two-core cable | External AC 100–240 V | Retrofit where two-core cable exists |
| GA10 | ATA gateway | FXS (RJ11) plus 10/100 Mbps network | Micro USB DC 5V/1A | Analog phones on an IP system |
Frequently asked questions
Do I need a PBX to use these products?
Can the meeting room and the desk phones run on one system?
Which products are sold as kits?
What about the 2-wire switch and the larger converter models?
Why are some models missing from this page?
Planning an IP telephony project?
Send us the site type, the number of extensions or rooms and the areas to cover — we will come back with a configuration and quotation.
Send the site details
Six facts build a configuration: site type, extensions or rooms, simultaneous calls, areas to cover, existing lines and the documents you already hold. Send as many as you know — nothing has to be final before the first reply.
- Reply within one working day
- Configuration + quotation for your site
- Your details are used only to answer this inquiry
Page author: NEXVIA EngineeringPublished: Last updated: